Sharp XG-MB70X Schnellstart Anleitung PDF herunterladen (Seite 22)

-22

Controlling the Projector Using RS-232C or Telnet

IP Address Setting

([1]IP Address)

Setting of IP address.

1 Enter “1” and press the “Enter” key.

2 Enter numerical value to be set and press the

“Enter” key.

Display IP address after change (*).

Subnet Mask Setting

([2]Subnet Mask)

Setting subnet mask.

1 Enter “2” and press the “Enter” key.

2 Enter numerical value to be set and press the

“Enter” key.

Display subnet mask after change (*).

The setting procedure for each item will be explained. For the basic procedure, please refer

to “Set Items” on page 20.

setup>1

IP Address :192.168.150.2

Please Enter :192.168.150.3

(change) —> 192.168.150.3

setup>2

Subnet Mask :255.255.255.0

Please Enter :255.0.0.0

(change) —> 255.0.0.0

Default Gateway Setting

([3]Default Gateway)

Setting default gateway.

1 Enter “3” and press the “Enter” key.

2 Enter numerical value to be set and press the

“Enter” key.

Display gateway address after change (*).

Note

• If the values for IP Address, Subnet Mask or Gate-

way of the projector have been changed via Telnet,

the computer for controlling cannot be connected

to the projector depending on the computer’s net-

work settings.

setup>3

note: “0.0.0.0” means “Using no default gateway.”

Gateway Address :0.0.0.0

Please Enter :192.168.150.1

(change) —> 192.168.150.1

XG-MB70X_E_P20_30.p65 04.8.6, 4:53 PM22

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 28 29 30

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp XG-MB70X Schnellstart Anleitung Seite 22

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Datenprojektoren Sharp XG-MB70X