Sharp VL-Z8H Spezifikationen PDF herunterladen (Seite 34)

22

Basic Operations

Basic Operations

Camera Recording

Easy Camera

Recording on Tape in

Full Auto Mode

Available mode:

Tape Camera

• Before you start recording, perform the

operations described on pages 6 through

20 to prepare your camcorder for

recording.

1 Remove the lens cap.

2 Set the Media Selection

switch to V.

3 Hold down the Lock button and set

the Power switch to v.

• The picture from the lens now

displays and the POWER/CHARGE

(RED) indicator lights up green.

• The camcorder is now ready to

record (Recording Standby mode).

Note:

• If “AUTO” is not displayed at this time,

set the camcorder to Full Auto mode

(see page 58).

AU T OAUTO

4 Press the Start/Stop button to begin

recording.

REC

Note:

• Before recording an important scene,

please perform the recording test, then

playback to check if the scene was

recorded properly. If noise occurs, use a

commercially available cleaning tape to

clean the video heads (see page xii).

Maximum continuous recording and

actual recording times in Tape

Camera mode

Note:

• Using the zoom (see page 23) and other

functions or turning the power on and off

frequently will increase power consump-

tion. This may result in a decrease in the

actual recording time compared to the

maximum continuous recording time listed

above.

Media Selection switch

Start/Stop button

Power switch

Lock button

BT-L226

Battery

pack

Max. continuous

recording time

115

LCD

closed

LCD

open

100

POWER/CHARGE

(RED) indicator

Actual

recording time

55

LCD

closed

LCD

open

50

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 123 124

Kommentare zu diesen Handbüchern

Keine Kommentare