Sharp AL-1451 Spezifikationen PDF herunterladen (Seite 86)

AL-1551 SIMULATION, TROUBLE CODES 10-12

50 18 Memory reverse position adjustment in duplex copy

When this simulation is executed, the currently set correction value is displayed. Enter the desired correction value with the 10-key and

press the print key. The entered value is stored. (The correction value ranges from 1 to 99. 0 or 50 for zero correction.)

Front print in the S-D mode and even page print in the D-S mode are performed with reverse memory operation from the rear of the

original. When, therefore, the print position adjustment of the output image is required, perform the adjustment as follows:

The image direction in reverse memory copy is shown in Fig. 1. When the original scanning is made in the arrow direction, output

images are printed from the rear edge of scanning.

If, therefore, the print lead edge is shifted, set the reference chart so that the reference position is in the rear and use this simulation to

change the simulation set value so that the lead edge of print images comes in the proper position.

Printing is started at the print start position and executed from the final memory image data to the head data.

By changing the position of the end data stored in memory with the simulation set value, the image lead edge position is adjusted and

the read edge position of scanning is changed.

Therefore, the end position of scanning is changed by the simulation set value to change the position of the end data stored in memory.

The image lead edge is adjusted in this manner.

19 Duplex copy rear edge void adjustment

Used to adjust the rear edge void in duplex copy.

(Operating procedure)

When this simulation is executed, the currently set value is displayed in 2 digits.

When the copy mode select key is pressed, the set mode and the display are switched sequentially.

Enter the adjustment value with the 10-key and press the print key, and the entered value is stored and a copy is made. When the clear

key is pressed, the entered value is stored and the simulation mode is terminated.

(When the set value is increased by 1, the void is increased by about 0.1mm.)

Main

code

Sub

code

Content

Original transport direction

Lead edge of scanning

Paper transport direction

Print lead edge

Lead edge void (1)

Print start position

Rear edge void

Print rear edge

End position of scanning

(Default: Scan cut by void(1))

Rear edge of scanning

Scanning direction

Adjustment mode Lamp ON

Image cut rear edge void (RSPF) AE lamp

Paper rear edge void TEXT lamp

1 2 ... 81 82 83 84 85 86 87 88 89 90 91 ... 125 126

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp AL-1451 Spezifikationen Seite 86

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Multifunktionsgeräte Sharp AL-1451