Sharp MX-B201D Schnellstart Anleitung PDF herunterladen

PRINTED IN CHINA 2010L KS1 TINSE2155QSZZ

DIGITAL MULTIFUNCTIONAL SYSTEM

START GUIDE

MODEL: MX-B201D

This guide explains how to install the machine, and indicates important points to note for installation and usage. Read and understand this guide to

ensure that you install the machine correctly. The Operation Guide for the machine is on the accompanying CD-ROM. The procedure for viewing the

guide is explained in "4. HOW TO USE THE OPERATION GUIDE". After installation, read the Operation Guide to make full use of all the machine

has to offer.

1. TONER CARTRIDGE REPLACEMENT

When toner is low, the error indicator will light up and "TONER CARTRIDGE IS NEAR EMPTY." will appear in the display to alert you to purchase a

new toner cartridge. on purchasing a new toner cartridge. If copying is continued while the indicator is lit, copies will gradually become lighter until

the toner runs out. When the toner runs out, the machine will stop operating, the error indicator will blink, and "REPLACE THE TONER

CARTRIDGE" will appear in the display. Follow the procedure below to replace the toner cartridge.

• After the machine stops, it may be possible to make a few more copies by taking the toner cartridge out of the machine, shaking it horizontally,

then reinstalling it. If copying is not possible after this operation, replace the toner cartridge.

• During a long copy run of a dark original, "TONER REPLENISHMENT IN PROGRESS" appears in the display, and the machine may stop even

though toner is left. The machine will feed toner up to 2 minutes and then the ready indicator will light up. Press the [START] key ( ) to

resume copying.

Open the bypass tray, and then

open the side cover while pressing

the side cover open button.

Push gently on both sides of the

front cover to open the cover.

Gently pull the toner cartridge out while pressing the lock

release lever.

• After removing the toner cartridge, do not shake it or

tap on it. Doing so may cause toner to leak from the

cartridge. Put the old cartridge immediately in the bag

contained in the box of the new cartridge.

• Dispose of the old toner cartridge in accordance with

local regulations.

Remove the toner cartridge from the bag.

Grasp the cartridge on both sides and shake

it horizontally four or five times. After

shaking the cartridge, remove the toner

seal.

Gently insert the toner cartridge along the

guides until it locks in place while pushing

the lock release lever.

Remove the tape from the shutter. Pull the

shutter out of the toner cartridge as shown

in the illustration. Discard the shutter.

Close the front cover and then the side

cover by pressing the round projections

near the side cover open button. The error

indicator will go out and the ready indicator

will light up.

Grasp the toner cartridge as shown in

the illustration. Do not hold the

cartridge by the shutter. Be sure to

only shake the cartridge before the

toner seal is removed.

When closing the covers, be sure to

close the front cover securely and then

close the side cover. If the covers are

closed in the wrong order, the covers

may be damaged.

Even after a new toner cartridge is

installed, the start ( ) indicator may

not light up, indicating copying cannot

be restarted (toner is not sufficiently

fed). In this case, open and close the

side cover. The copier will feed toner

again approximately 2 minutes and

then copying can be restarted.

Toner cartridge lock release leve

4 or 5 times

Shutter

Toner seal

2. LOADING PAPER

3. POWER ON AND OFF

About the scan head

The scan head lamp remains on constantly when the unit is in the ready condition (when the start ( ) indicator is illuminated).

The unit adjusts the scan head lamp periodically to maintain copying quality. At this time, the scan head moves automatically. This is normal and does not

indicate unit trouble.

4. HOW TO USE THE OPERATION GUIDE

Detailed explanations of the functions that can be used on the machine are provided in the Operation Guide in PDF format.

Raise the handle of the paper tray and

pull the paper tray out until it stops.

Rotate the pressure plate lock in the direction

of the arrow to remove it while pressing down

the pressure plate of the paper tray.

Store the pressure plate lock which has been

removed in step 2. To store the pressure plate

lock, rotate the lock to fix it on the relevant

location.

Squeeze the lever of paper guide (A) and slide

the guide to match with the width of the paper.

Move paper guide (B) to the appropriate slot

as marked on the tray.

Fan the paper and insert it into the tray.

Make sure the edges go under the

corner hooks.

Gently push the paper tray back into the unit.

• Be sure that paper is free of rips, dust,

wrinkles, and curled or bent edges.

• Make sure all the paper in the stack is

the same size and type.

• When loading paper, ensure there is no

space between the paper and the

guide, and check if the guide is not set

too narrow causing the paper to bend.

Loading paper in these ways will result

in document skew or a paper jam.

If you use the unit in a country other than the country where the unit was purchased, you will need to make sure that your local power supply is

compatible with your model. If you plug the unit into an incompatible power supply, irreparable damage to the unit will result.

Turn the power switch on the left side of the unit to the "ON" position.

The ready indicator will light up and other indicators which show the

initial settings of the display will also light up to indicate the ready

condition. For the initial settings, see "Initial settings" on the Operation

Guide.

Ensure that the power switch of the unit is in the OFF position.

If the power switch is turned off while the machine is in operation, a

misfeed may occur and the job that was in progress will be canceled. In

cases where the machine will not be used for a long time, turn off the

power switch and remove the power cord from the outlet.

Insert the supplied CD-ROM into your

computer's CD-ROM drive.

Display the contents of the CD-ROM, and open

the Operation Guide file.

(B)

(A)

OFF

Operation Guide CD-ROM

Manual English

Operation Guide file (PDF)

* To view the Operation Guide in PDF format,

Adobe

Reader

or Acrobat

Reader

Adobe Systems Incorporated is required.

Adobe

Reader

can be downloaded from the

following URL:

http://www.adobe.com/

1 2

Inhaltsverzeichnis

Seite 1 - START GUIDE

PRINTED IN CHINA 2010L KS1 TINSE2155QSZZDIGITAL MULTIFUNCTIONAL SYSTEMSTART GUIDEMODEL: MX-B201DThis guide explains how to install the machine, and in

Seite 2 - ENVIRONMENTAL INFORMATION

SPECIFICATIONS*1 When making multiple duplex copies, the copy speed will vary based on the environment conditions.*2 First copy time may vary dependin

Weitere Dokumente für Kopierer Sharp MX-B201D

Um das Dokument anzuzeigen Sharp MX-B201D Spezifikationen

Sharp MX-B201D Spezifikationen (117 Seiten)

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp MX-B201D Schnellstart Anleitung

Stöbern Sie online oder laden Sie Schnellstart Anleitung nach Kopierer Sharp MX-B201D herunter. Sharp MX-B201D Quick Guide [en] Benutzerhandbuch

Inhaltsverzeichnis

Weitere Dokumente für Kopierer Sharp MX-B201D

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kopierer Sharp MX-B201D