Sharp MX-M260 Spezifikationen PDF herunterladen (Seite 110)

108

SYSTEM SETTINGS (ADMINISTRATOR)

OUTPUT TRAYS

(When a JOB SEPARATOR TRAY KIT or

FINISHER and Right tray are installed)

This program is used to select the respective output

trays for the copy, printer, and fax functions.

The factory default setting is "PATTERN 1".

Example:When a FINISHER and Right tray are

installed

* Settings that can be selected vary depending on the

options that are installed.

DISABLING OF OFFSET

This program is used to enable or disable the offset

functions of the offset tray.

This program is initially disabled (factory default

setting).

MEMORY FOR PRINTER

This program is used to set the amount of IMC

memory that is allocated to the printer function. The

amount of memory can be set from 30% to 70% in

increments of 10%.

The factory default settings are as follows:

•50 (%)

• THE MEMORY AREA FOR PRINT HOLD: 30 (%)

● Memory allocated to print hold

(When the PRINTER EXPANSION KIT is installed)

To set the amount of memory allocated to print hold,

touch the [THE MEMORY AREA FOR PRINT

HOLD] key. The amount of memory can be set from

30% to 70% in increments of 10%. If 0% is selected,

the print hold function cannot be used.

DISABLING OF CENTRE TRAY

COUNTING

This program is used to disable counting of pages

delivered to the centre tray.

When this program is enabled, centre tray full

detection does not take place.

This program is initially disabled (factory default

setting).

RETURN FROM COPY MODE TIMING

(When the printer function or fax function is enabled)

This program is used to set the amount of time that

must elapse after a copy job is finished before the

printer or fax function resumes operation. The amount

of time can be set from 1 second to 60 seconds in

increments of 1 second.

The factory default setting is "60" (sec.).

MIX SIZE ORIGINAL FEEDING MODE

(When an RSPF is enabled)

When this program is enabled, originals of mixed

length (the widths must be the same) can be scanned

in copy mode and each original copied onto the

corresponding length of paper.

This program is initially disabled (factory default

setting).

SECURITY SETTINGS

The following settings are related to security. Touch

the [SECURITY SETTINGS] key to configure the

settings.

When any of these settings are changed, you must exit

the administrator settings, turn off the main switch,

wait a brief interval, and then turn the main switch back

on to make the new settings take effect.

● SSL SETTINGS

SSL can be used for data transmission over a

network.

SSL is a protocol that enables the encryption of

information communicated over a network.

Encrypting data makes it possible to transmit and

receive sensitive information safely.

•

HTTPS: Apply SSL encryption to HTTP

communication.

•

IPP-SSL: Apply SSL encryption to IPP communication.

● ENABLE IPsec

IPsec can be used for data transmission/reception

on a network. When IPsec is used, data can be sent

and received safely without the need to configure

settings for IP packet encryption in a Web browser

or other higher-level application.

This setting is only used to enable or disable IPsec;

detailed IPsec settings are configured in the Web

pages.

Some Web page settings may not allow connection

to the machine, or the settings may not allow

printing, scanning, or Web page display. In this

case, deselect [ENABLE IPsec] in this screen and

change the Web page settings.

Settings Description

PATTERN 1 Printer: Offset tray

Fax: Right tray

Copy: Offset tray

PATTERN 2 Printer: Right tray

Fax: Right tray

Copy: Offset tray

PATTERN 3

(When the fax

function is enabled)

Printer: Offset tray

Fax: Right tray

Copy: Offset tray

SYSTEM SETTINGS

SECURITY SETTINGS

SSL SETTINGS

ENABLE IPsec

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 159 160

Kommentare zu diesen Handbüchern

Keine Kommentare

Dewalt DW101 Bedienerhandbuch (5 Seiten)

Marke: Dewalt | Kategorie: Power tools | Größe: 0.13 MB |

Inhaltsverzeichnis

DW100/DW101/DW106

3/8" (10mm)V.S.R. Drill

CONSERVEZ CES INSTRUCTIONS

SECCI N

AMARILLA

Weitere Produkte und Handbücher für Elektrowerkzeuge DeWalt

Modelle	Dokumententyp
DW744	Bedienerhandbuch DeWalt DW744 Instruction Manual, 35 Seiten
DW331	Bedienerhandbuch DeWalt DW331 Instruction Manual, 6 Seiten
DW705	Bedienungsanleitung DeWalt DW705 User's Manual, 52 Seiten
D26411	Bedienerhandbuch DeWalt D26411 Instruction Manual, 32 Seiten
DWM120	Bedienungsanleitung DeWalt DWM120 User's Manual, 7 Seiten
DW321	Bedienerhandbuch DeWalt DW321 Instruction Manual, 5 Seiten
DW130V	Bedienungsanleitung DeWalt DW130V User's Manual, 5 Seiten
D21002	Bedienerhandbuch DeWalt D21002 Instruction Manual, 7 Seiten
DWD024	Bedienerhandbuch DeWalt DWD024 Instruction Manual, 32 Seiten
DWP611	Bedienungsanleitung DeWalt DWP611 User's Manual, 7 Seiten
616974-00	Bedienerhandbuch DeWalt 616974-00 Instruction Manual, 4 Seiten
DW308M	Bedienungsanleitung DeWalt DW308M User's Manual, 4 Seiten
DW511	Bedienerhandbuch DeWalt DW511 Instruction Manual, 5 Seiten
D24000	Bedienerhandbuch DeWalt D24000 Instruction Manual, 42 Seiten
36-714	Bedienerhandbuch DeWalt 36-714 Instruction Manual, 80 Seiten
a22946	Bedienerhandbuch DeWalt a22946 Instruction Manual, 6 Seiten
D28710	Bedienerhandbuch DeWalt D28710 Instruction manual, 44 Seiten
DCH213	Bedienerhandbuch DeWalt DCH213 Instruction manual, 53 Seiten
DW680	Bedienerhandbuch DeWalt DW680 Instruction manual, 7 Seiten
DWE315	Wartungshandbuch DeWalt DWE315 Technical data, 15 Seiten

Sharp MX-M260 Spezifikationen Seite 110

Kommentare zu diesen Handbüchern

DeWalt DW101 Handbücher

Dewalt DW101 Bedienerhandbuch (5 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Elektrowerkzeuge DeWalt

Sharp MX-M260 Spezifikationen Seite 110

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kopierer Sharp MX-M260

DeWalt DW101 Handbücher

Dewalt DW101 Bedienerhandbuch (5 Seiten)

Inhaltsverzeichnis

Weitere Produkte und Handbücher für Elektrowerkzeuge DeWalt