Sharp R-450E Betreibershandbuch PDF herunterladen (Seite 30)

WORKING TECHNIQUES

Kickback always occurs in the cutting plane of the bar.

Normally the chain saw and bar are thrown backwards

and upwards towards the user. However, the chain saw

may move in a different direction depending on the way it

was being used when the kickback zone of the bar

touched the object.

Kickback only occurs if the kickback zone of the bar

touches an object.

Limbing

_ WARNING! A majority of kickback

_ ccidents occur during limbing. De net

use the kickback zone of the guide bar.

Be extrernely cautieus and avoid

contacting the log, other limbs or objects

with the nose of the guide bar. Be

extremely cautious of limbs under

you and causeless of control resulting

in injury.

Make sure that you can stand and move about safely.

Work on the left side of the trunk. Work as close as

possible to the chain saw for maximum control. If possible,

let the weight of the chain saw rest on the trunk.

Keep the trunk between you and the chain saw as you

move along the trunk.

Cutting the trunk into logs

See instructions under the heading Basic cutting

technique.

30 - English 545186839 Rev. 1 2008-06-27

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 ... 43 44

Keine Kommentare

Sharp R-450E Betreibershandbuch Seite 30