Sharp ER-01PU Bedienungsanleitung PDF herunterladen (Seite 4)

CHAPTER 2. MASTER RESET (All Memory Clear)

There are three possible methods to perform a master reset.

MRS-1 (Master resetting 1)

Used to clear all memory contents and return machine back to its

initial settings.

The keyboard is set to the keyboard default keyboard layout.

PROCEDURE

1) Turn off the AC switch.

2) Set the reset switch to "ON" position

3) Turn on the AC switch. (Wait one second)

4) While holding down the MRS-1 key, place the reset switch to

"OFF".

MRS-1 key: The key located on Left upper corner of the key-

board.

5) Enter the password key operation

DISPLAY:

Press the four corners of the keyboard in

the sequence of a, b, c, and d.

6) The master reset is started.

DISPLAY:

MASTER RESET

7) After completion of the master reset, the buzzer sounds three

times and the following SRV mode display is shown.

DISPLAY:

MRS-2 (Master resetting 2)

Used to clear all memory and keyboard contents. This reset returns

all programming back to defaults.

The keyboard must be entered from. This reset is used if an applica-

tion needs different keyboard layout other than that supplied by a

normal MRS-1.

PROCEDURE

1) Turn off the AC switch.

2) Set the reset switch to the "ON" position

3) Turn on the AC switch. (Wait five seconds)

4) While holding down the MRS-2 key, place the reset switch to

"OFF" .

MRS-2 key: The key located at the upper right corner of the

keyboard.

MRS-1 Key

Keyboard layout

ENTER PASSWOPRD

Keyboard layout

MASTER RESET

MRS-2 Key

Keyboard layout

1 2 3 4 5 6 7 8 9 ... 43 44

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp ER-01PU Bedienungsanleitung Seite 4

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Sharp ER-01PU