Sharp MZ-80P4 Spezifikationen Seite 7

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 25
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 6
Connection with computers
(1)
Connection with computer MZ-80B/MZ-80A
STEP
1. Turn
off
power for all equipment.
STEP
2.
Install an expansion unit
in
the computer and
insert an
I/O card into this unit. Insert the card in
Slit No.3 for MZ-80B (where 6 slits are available),
and
in
Slit No.2 for MZ-80A (where 4 slits are
available). The picture on the right shows correct
insert
of
the I/O card.
STEP
3. Connect the connector on one end
of
the signal
cable to the signal terminal
of
the I/O card. Then,
fix the connector with the attached screws.
Since
the connectors provided on
both
ends
of
the signal
cable have different shapes, do not confuse them.
Be
sure to use the two screws for fixing the con-
nector.
STEP
4. Connect the connector on the other end
of
the
signal cable to the signal terminal on the back
of
the printer. Then fix the connector using the fixing
pins on
both
ends
of
the signal terminal.
STEP
S.
Connect one cnd
of
the attached hraided wire to
the FG terminal
of
the printer, and the other end
to the FG terminal
of
the computer.
Do
not
fail
to connect the braided wire.
(Back of computer)
f-
-1-:------::=1-
I
el
e
le
1/0
card
Fig. 1
®L-----
----
Fig. 2
Fix
the COnnector using the fixing pins.
Connect
to
the FG terminal
c:::J
-
of the computer. 0
......
..x=~~==lg~~
Braided wire
Fig. 4
FG
4
Seitenansicht 6
1 2 3 4 5 6 7 8 9 10 11 12 ... 24 25

Kommentare zu diesen Handbüchern

Keine Kommentare