Sharp SF-1020 Wartungshandbuch PDF herunterladen (Seite 74)

Remove three fixing screws (M4 × 10) of the left cabinet, and

remove the left cabinet. Remove the plastic E-ring which is fixing

the paper exit cabinet unit, and slide the paper exit cabinet unit in

the arrow direction and remove it from the copier.

2 Remove two fixing screws (M4, flat) of the paper exit cabinet unit

and one fixing screw (M3 × 6) of the paper exit plate spring.

3 Remove two E-rings (7E) at the both ends of the reverse roller.

4 Remove the gear and the parallel pin (???3 × 10) from the reverse

roller.

5 Remove two E-rings (E7) inside of the gear.

6 Remove two bearings at the both ends of the reverse roller.

7 Slide the reverse roller in the direction of Q.

12. Paper feed unit (SF-CM15, SF-CM16,

option)

This unit had two stages of paper feed section of the SF-2020 (one

stage for the SF-CM16). For disassembly and assembly, refer to

[5]-(1) Paper feed section.

6 – 27

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 139 140

Keine Kommentare

Sharp SF-1020 Wartungshandbuch Seite 74