Sharp Display Manager Spezifikationen PDF herunterladen (Seite 24)

Troubleshooting

If a problem as mentioned below is encountered, take the actions indicated in the list. If the problem cannot be

solved, contact the Sharp authorized projector dealer or Service Center.

Problem

No devices are found or

communication is impossible.

Cause and Solution

• Check that the cable’s connector is firmly inserted in the LAN terminal of the device.

• Check that the cable is firmly inserted into a LAN port for a PC or a network device

such as a hub.

• Check that the LAN cable is a Category 5 cable.

• Check that the LAN cable is a cross-over cable when connecting the device to a PC

directly.

• Check that the LAN cable is a straight-through cable when connecting the device with

a network device such as a hub.

• Check that the power supply is turned on for the network device such as a hub

between the device and a PC.

• Check the following network settings for the device.

IP Address

Check that the IP address for the device is not duplicated on the network.

Subnet Mask

When the gateway setting for the projector is "0.0.0.0" (Not Used), or the gateway

setting for the device and the default gateway setting for the PC are the same:

- The subnet masks for the device and the PC should be the same.

- The IP address parts shown by the subnet mask for the device and the PC should

be the same.

(Example)

When the IP address is "192.168.150.2" and the subnet mask is "255.255.255.0" for

the device, the IP address for the PC should be "192.168.150.X" (X=3-254) and the

subnet mask should be "255.255.255.0".

Gateway

When the gateway setting for the device is "0.0.0.0" (Not Used), or the gateway

setting for the device and the default gateway setting for the PC are the same:

- The subnets for the device and the PC should be the same.

- The IP address parts shown by the subnet mask for the device and the PC should

be the same.

(Example)

When the IP address is "192.168.150.2" and the subnet mask is "255.255.255.0" for

the device, the IP address for the PC should be "192.168.150.X" (X=3-254) and the

subnet mask should be "255.255.255.0".

• Check if the "TCP/IP" protocol is operating correctly using the "PING" command and it

is communicating with the device.

1. Open a command prompt.

Click "START" ➔ "All Programs" ➔ "Accessories" ➔ "Command Prompt" in order.

2. After launching the command prompt enter a command "PING".

Entry example C:\>Ping XXX.XXX.XXX.XXX

"XXX.XXX.XXX.XXX" should be entered with an IP address to be connected to,

such as the device.

3. When connecting normally, the display will be as follows.

(The screen may be slightly different depending on the OS type).

<Example> when the IP address connected to is "192.168.150.1"

Disp_Manager_E_p24-28.p65 08.5.2, 2:47 PM24

1 2 ... 19 20 21 22 23 24 25 26 27 28 29

Kommentare zu diesen Handbüchern

Keine Kommentare

Flex 60 TPO Uživatelský manuál (2 strany)

Značka: Flex | Kategorie: For Home | Velikost: 0.07 MB |

Tabulka s obsahem

Product Data Sheet

Další produkty a příručky pro Pro domov Flex

Modely	Typ Dokumentu
TPO 60 Self Adhered	Uživatelský manuál Flex TPO 60 Self Adhered User Manual, 2 stránky
80 TPO	Uživatelský manuál Flex 80 TPO User Manual, 2 stránky
TPO PLUS Adhered roof membrane	Uživatelský manuál Flex TPO PLUS Adhered roof membrane User Manual, 5 stránky
7008 Laminating Adhesive	Uživatelský manuál Flex 7008 Laminating Adhesive User Manual, 2 stránky
Bonding Adhesive	Uživatelský manuál Flex Bonding Adhesive User Manual, 2 stránky
FB LOW Rise Adhesive	Uživatelský manuál Flex FB LOW Rise Adhesive User Manual, 2 stránky
LA432M	Uživatelský manuál Flex LA432M User Manual, 2 stránky
TPO Primer	Uživatelský manuál Flex TPO Primer User Manual, 2 stránky
HE903	Uživatelský manuál Flex HE903 User Manual [en] , 2 stránky
Pourable Sealert	Uživatelský manuál Flex Pourable Sealert User Manual [de] , 2 stránky
Substrate Adhesive 7003	Uživatelský manuál Flex Substrate Adhesive 7003 User Manual, 2 stránky
TPO Clear Cut-Edge Sealant	Uživatelský manuál Flex TPO Clear Cut-Edge Sealant User Manual, 2 stránky
TPO Bonding Adhesive	Uživatelský manuál Flex TPO Bonding Adhesive User Manual, 3 stránky
TPO Substrate Adhesive	Uživatelský manuál Flex TPO Substrate Adhesive User Manual, 2 stránky
TPO Low VOC Bonding Adhesive	Uživatelský manuál Flex TPO Low VOC Bonding Adhesive User Manual, 3 stránky
TPO WB Substrate Adhesive	Uživatelský manuál Flex TPO WB Substrate Adhesive User Manual, 2 stránky
TPO Weathered Membrane Cleaner	Uživatelský manuál Flex TPO Weathered Membrane Cleaner User Manual, 3 stránky
Thermoplastic Pourable Sealer	Uživatelský manuál Flex Thermoplastic Pourable Sealer User Manual, 2 stránky
80 Mil SS Base Sheet	Uživatelský manuál Flex 80 Mil SS Base Sheet User Manual, 2 stránky
140N Geotextile Separation Layer	Uživatelský manuál Flex 140N Geotextile Separation Layer User Manual, 1 stránky

Sharp Display Manager Spezifikationen Seite 24

Kommentare zu diesen Handbüchern

Flex 60 TPO manuály

Flex 60 TPO Uživatelský manuál (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Pro domov Flex

Sharp Display Manager Spezifikationen Seite 24

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Sharp Display Manager

Flex 60 TPO manuály

Flex 60 TPO Uživatelský manuál (2 strany)

Tabulka s obsahem

Další produkty a příručky pro Pro domov Flex