Sharp 59CS-D8H Bedienungsanleitung PDF herunterladen (Seite 10)

Special functions

Trapezoid function with tilt sensor

If access to the object to be measured is limited and measurements

can only be taken from one position, then this is no problem – thanks

to the integral tilt sensor. This trapezoid function can also be used to

quickly and safely determine roof slopes and frontage areas.

Triangle function

The triangle function helps you quickly and efﬁ ciently to arrive at

the area of a multi-cornered room. Divide the room into imaginary

triangles. Then use three measurements to determine the areas of

each of the triangles, which you can add together as you proceed.

Finally all you have to do is read off the result.

A=A1+A2+A3

Stake Out Function

Two different distances (A and B) can be entered in the device

and then be used to mark off deﬁ ned measured lengths. At each

measured length, the display shows the current marking distance

and a direction arrow. Additionally, an alarm signal starts to ring

at a distance of 4 inch from the next stake out point.

a1,00m

a=b

1,00m

b1,00m

a1,00m

a=b

0,75m

Trapezoid function

The trapezoid function is used to quickly and safely determine

roof slopes and frontage areas, for example. You only need to

take three measurements, and the result appears on the display.

Leica_Flyer_D5D8_ENUS_V2.indd 10 12.3.2009 13:02:54 Uhr

1 2 ... 5 6 7 8 9 10 11 12 13 14

Keine Kommentare

Sharp 59CS-D8H Bedienungsanleitung Seite 10