Sharp CD-E250E Installationsanleitung PDF herunterladen (Seite 12)

MN-748

CAUTION

WHEN CUTTING OR TRIMMING THE AIR LINE, USE A HOSE CUTTER, A RAZOR BLADE,

OR A SHARP KNIFE. A CLEAN, SQUARE CUT WILL ENSURE AGAINST LEAKS. DO

NOT USE WIRE CUTTERS OR SCISSORS TO CUT THE AIR LINE. THESE TOOLS MAY

FLATTEN OR CRIMP THE AIR LINE CAUSING IT TO LEAK AROUND THE O-RING SEAL

INSIDE THE ELBOW FITTING (FIG. 19).

Rubber washer (W)

5/16” Hex nut (Y)

Air line (S)

Vehicle body or

bumper

5/16” Flat

washer

(V)

5/16” Hex nut (Y)

Valve cap

(U)

Star washer (X)

g. 20

4. Place a 5/16” nut and star washer (X) on the air valve. Leave enough of the ination

valve in front of the nut to extend through the hole and have room for the rubber washer

(W), at washer (V), and 5/16” nut (Y) and valve cap (U). There should be enough valve

exposed after installation—approximately ½”— to easily apply a pressure gauge or an

air chuck (fig. 20).

5. Push the inflation valve through the hole and use the rubber washer, flat washer, and

6. Route the air line along the frame to the air fitting on the air spring (fig. 21). Keep AT

LEAST 6” of clearance between the air line and heat sources, such as the exhaust pipes,

muffler, or catalytic converter. Avoid sharp bends and edges. Use the plastic tie straps

(T) to secure the air line to fixed, non-moving points along the chassis. Be sure that the

tie straps are tight, but do not pinch the air line. Leave at least 2” of slack to allow for

any movement that might pull on the air line (fig. 21).

Good Cut Poor Cut

g. 19

INSTALLING THE AIR LINES

1. Choose a convenient location for mounting the ination valves. Popular locations for the

ination valve are:

a. The wheel well anges

b. The license plate recess in bumper

c. Under the gas cap access door

d. Through the license plate

Whatever the chosen location, make sure there is enough clearance around the ination

valves for an air chuck.

2. Drill two 5/16” holes to install the ination valves.

3. Cut the air line assembly in two equal lengths.

NOTE

LoadLifter 5000

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Kommentare zu diesen Handbüchern

Keine Kommentare

Philips HD4683/50 Ficha de datos (2 paginas)

Marca: Philips | Categoria: Electric kettles | Tamaño: 1.03 MB |

Tabla de contenidos

Clear water, cleaner kettle

Specifications

Highlights

Philips HD4683/50 Manual de usuario (10 paginas)

Marca: Philips | Categoria: Electric kettles | Tamaño: 0.49 MB |

Tabla de contenidos

Más productos y manuales para Hervidores eléctricos Philips

Modelos	Tipo de documento
HD9382	Manual de usuario Philips HD9382, 2 paginas
HD4646/00	Especificaciones Philips HD9340/90 spécification [de] [es] [fr] [it] [nl] [pl] [pt] , 6 paginas
HD4681/85	Manual de usuario Philips Kettle HD4681/85, 11 paginas
HD4608/70	Manual de usuario Philips Daily Collection HD4608 0.8 liter Kettle, 13 paginas
HD4678	Manual de usuario Philips Viva Collection HD4678, 14 paginas
HD4669/20	Manual de usuario Philips HD4669/22 User manual, 2 paginas
HD4686/60	Manual de usuario Philips HD4685/90 Benutzerhandbuch, 108 paginas
HD4659/55	Ficha de datos Philips Kettle HD4659/55, 2 paginas
HD468155	Ficha de datos Philips Kettle, 2 paginas
HD4667/20	Manual de usuario Philips HD4665/20 User manual, 13 paginas
HD4671/60	Manual de usuario Philips HD4671/60 User manual, 2 paginas
HD9309	Manual de usuario Philips HD9309/00 Benutzerhandbuch, 12 paginas
HD4646/00	Manual de usuario Philips HD4646/00 Manuale utente, 8 paginas
HD4618	Manual de usuario Philips HD4618/20 User manual, 8 paginas
HD4654/22	Manual de usuario Philips HD4654/22 electrical kettle, 13 paginas
HD4659/04	Manual de usuario Philips HD4659/04 User manual, 9 paginas
HD4664/20	Manual de usuario Philips HD4664/20 Kasutusjuhend, 2 paginas
HD4676	Manual de usuario Philips HD4676/20 User manual, 13 paginas
HD4644/00	Manual de usuario Philips HD4644/00 User manual, 2 paginas
HD4632	Manual de usuario Philips Kettle HD4631/22, 11 paginas