Sharp R-55TSF Betriebsanleitung PDF herunterladen (Seite 110)

MAINTENANCE

Side and Rear Flail Maintenance Section 4-24

MAINTENANCE

Blade Pins and D-Ring Inspection

Blade Pins and D-Rings daily for wear or damage as follows:

Inspect the Blade pins and D-Rings daily for abnormal wear. Make sure the cotter pins are

in place and properly spread. REPLACE BLADE Pins and D-Rings IMMEDIATELY if they

have:

• Visible cracks or

• If a Pin or D-Ring has visible worn areas, or

• If a Pin or D-Ring has gouges or chipped areas

Failure to replace abnormally worn pins or D-Rings may lead to catastrophic failure and ejection of the broken

part which may cause serious bodily injury or death.

Always replace the pins and D-Rings whenever excessive wear is noticed.

If the cotter pins are broken by contact with other flail blades, remove the pin and reverse

the direction the pin is inserted through the D-Ring so that the cotter pin is on the opposite

side of the D-Ring. This will prevent the next set of blades from swinging back and hitting

the cotter pin.

OPS-U-0045

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 247 248

Keine Kommentare

Sharp R-55TSF Betriebsanleitung Seite 110