Sharp PG-M10S Wartungshandbuch PDF herunterladen (Seite 12)

PG-M10SU/SE

PG-M10XU/XE

7) Lamp driver (See Fig. 7.)

Remove the two screws (S-16 and S-17 each)

shown in Fig. 7, and dismount the lamp driver.

Lamp Driver

S-19

S-16

S-17

Fig. 7

8) Lens base (See Fig. 8.)

Remove the four screws (S-7) shown in Fig. 8, and

detach the lens base.

Note: When disassembling or reassembling, be careful

not to get the wires caught. Do not dismount

the spherical mirror and the cylinder mirror out

of the lens base. Otherwise the adjustment will

be lost to produce shadows at the corners of

the screen.

Fig. 8

Lens Base

S-7

9) Heat sink (See Fig. 9.)

Remove the two screws (S-11) shown in Fig. 9, and

detach the heat sink.

Note: Be careful to fit the heat sink in the correct

direction.

Heat Sink A

Heat Sink B

S-11

Fig. 9

10)DMD and F/M PWB (See Fig. 10.)

Remove the four screws (S-9) shown in Fig. 10,

and detach the DMD and F/M PWB from the lens

base.

Note: Take care not to touch the elastomer, DMD

surface or terminals, and F/M PWB terminals

by finger. When reassembling, be careful not to

allow dust or dirt on the parts. Special care

should be taken in handling the DMD, elastomer

and F/M PWB, which will directly affect the image

quality.

Elastomer

Holder

DMD

F/M PWB

F/M Angle

S-9

Fig. 10

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp PG-M10S Wartungshandbuch Seite 12

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Sharp PG-M10S