Sharp PG-M10S Wartungshandbuch PDF herunterladen (Seite 14)

PG-M10SU/SE

PG-M10XU/XE

14)Lamp housing (See Fig. 15.)

Remove the three screws (S-7) shown in Fig. 15,

and detach the lamp housing from the bottom cover.

Remove the screws (S-15) shown in Fig. 15, and

detach the thermistor and thermistor plate.

Remove the screw (S-7) shown in Fig. 15, and

detach the ballast lock base.

With the lamp housing taken out, the 40 fan

assembly (DC) can be detached.

Note: Take note of the wiring for the 40 fan assembly,

which goes below the lamp housing.

Fig. 16

15)Power unit (See Fig. 16.)

Remove the two screws (S-7) shown in Fig. 16, and

detach the fan base from the cover.

Remove the screws (S-5 and S-10 one each) and

the two D/M spacers shown in Fig. 16, and detach

the power unit.

D/M Spacer

40FAN(L)

Power Unit

S-5

S-10

S-7

Fan Base

Fig. 15

Lamp housing

Thermistor

Ass’y

Thermistor

Plate

40FAN(DC)

S-7

S-15

16)Front and rear feet (See Fig. 17.)

As shown in Fig. 17, press the hook (1) first and

then the hook (2). Remove the front feet.

Turn the rear feet away out of place.

Remove the screw (S-7) shown in Fig. 17, and

detach the lamp limit switch.

Front Foot

S-7

Rear Foot

Lamp Limit

Switch

Fig. 17

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 30 31

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp PG-M10S Wartungshandbuch Seite 14

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Projektoren Sharp PG-M10S