Sharp CD-M4000 Betriebsanweisung PDF herunterladen (Seite 402)

100

101

testsb(8)

380 XSCF Reference Manual • Last Revised January 2007

■ XSB is installed in the domain and this domain is in OpenBoot PROM (ok>

prompt) status.

■ XSB is installed in the domain and this domain is power ON status, power

OFF status, or reset status.

■ The addboard(8), deleteboard(8), or moveboard(8) command is executed

for XSB.

■ The displayed diagnostic results of the testsb(8) command are as follows:

EXAMPLES

EXAMPLE 1 Performs the initial diagnosis on PSB#00.

XSB XSB numbers belonging to the specified PSBs. One XSB number

is displayed for the Uni-XSB type, and four XSB numbers are

displayed for the Quad-XSB type.

Test Status of the initial diagnosis of XSBs. One of the following

status values is displayed:

Unmount No XSB could be recognized because no XSB

is mounted or because an error occurred.

Unknown Not tested.

Testing Initial diagnosis is in progress.

Passed Initial diagnosis ended normally.

Failed An error was detected during the initial

diagnosis. An XSB cannot be used or is in a

degraded state.

Fault XSB error. One or more states are displayed:

Normal Normal state.

Degraded One or more components are degraded.

Each XSB can operate.

Faulted An XSB cannot operate because an error

occurred.

XSCF> testsb 0

Initial diagnosis is about to start. Continue? [y|n] : y

Initial diagnosis is executing.

Initial diagnosis has completed.

XSB Test Fault

---- ------- --------

00-0 Passed Normal

00-1 Passed Normal

00-2 Passed Normal

00-3 Passed Normal

1 2 ... 397 398 399 400 401 402 403 404 405 406 407 ... 419 420

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp CD-M4000 Betriebsanweisung Seite 402

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Sharp CD-M4000