Sharp AH-X10BE Bedienungsanleitung PDF herunterladen (Seite 15)

13.3: Slide a Threaded Rod (SA) through the Truss Support Brace

and the top of the Truss Connector.

HL (6)

3/8” Wrench

13.4: Secure the top and bottom of the Threaded Rod with a 1/4” Cap Nut (HL).

Repeat Steps 13.1-13.4 for each Truss.

SA (3)

Hardware Bags:

1001884

WARNING

Do not overtighten the Cap Nut. If the end of

the Bolt breaks through the plastic cap, call

our Customer Service Department. Exposed

threads on the end of the Bolt may cause

serious injuries.

Right Door Assembly

9.1: Rest Right Shed Door (119) on the ground with front side down, then slide Door End

Channel (AG) onto the door.

PB (3)

VC (3)

Hardware Bags:

1033168, 1033418, 1033072

Screwdriver

Back of Door

CAUTION

Do not overtighten. Overtightening may

damage parts and void warranty.

9.2: Fit Thumb Lever

Knobs into Handle Grooves.

9.3: Rotate the Thumb Lever

into the handle. Slide forward

until the Knobs ﬁ t into the holes

in the handle.

8.4: Attach the Handle and Thumb lever to the

Door.

Knob

Groove

Knobs snap

into Holes

1 2 ... 10 11 12 13 14 15 16 17 18 19 20

Keine Kommentare

Sharp AH-X10BE Bedienungsanleitung Seite 15