Sharp AL-1651CS Wartungshandbuch Seite 37
- Seite / 160
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
AL-1651CS OPERATIONAL DESCRIPTIONS 7 - 7
(3) Conditions of occurrence of paper misfeed
a. When the power is turned on:
PPD or POD is ON when the power is turned on.
b. Copy operation
6. Process unit new drum detection
mechanism
1) When the power is turned on, the detection gear 38T is rotated in
the arrow direction by the detection gear 20T to push the micro-
switch (process detection switch) installed to the machine sensor
cover, making a judgement as a new drum.
2) When the detection gear 38T turns one rotation, there is no gear
any more and it stops.
The latch section of the 38T gear is latched and fixed with the
projection of the process cover.
7. RSPF section
A. Outline
The RSPF (Reverse Single Path Feeder) is installed to the AL-1651CS
as a standard provision, and it automatically copies up to 30 sheets of
documents of a same size. (Only one set of copies)
B. Document transport path and basic composition
a PPD1 jam PPD1 does not turn off within 4 sec after turning
on the resist roller.
b PPD2 jam PPD2 is off immediately after turning on the
resist roller.
PPD2 does not turn off within 1.2 sec after
turning off the resist roller.
c POD jam POD does not turn on within 2.9 sec after turning
on the resist roller.
POD does not turn off within 1.5 sec - 2.7 sec
after turning off PPD2.
Gear 20T
Process detection switch
Gear 38T
1 Pickup roller 2 Sheet of document for paper feed
3 Set detection ACT 4 Paper stopper
5 Document feed roller 6 Separation sheet
7 Paper entry sensor 8 PS roller D
9 Transport follower roller 10 Paper exit roller
11 Paper exit follower roller 12 Document tray
13 Switch gate
Gear notch
Gear pawl
Projection
Gear notch
Gear pawl
Projection
143
56712
8921113 10
- SERVICE MANUAL 1
- AL-1651CS 1
- CAUTION 2
- [1] GENERAL 5
- [2] SPECIFICATIONS 6
- 3. Copy performance 7
- 4. SPLC (JBIG GDI) printer 8
- 5. Scan function 8
- [3] CONSUMABLE PARTS 9
- Production control 10
- 1. Appearance 11
- 2. Internal 11
- 3. Operation panel 12
- 4. Motors and solenoids 13
- 5. Sensors and switches 14
- 6. PWB unit 15
- 7. Cross sectional view 16
- 1. Copier installation 17
- 2. Cautions on handling 17
- Lock Unlock 18
- Grasp here and turn in 18
- 7. Loading the paper tray 19
- 8. Power to copier 19
- 9. Software for AL-1651CS 19
- A. Before installation 20
- B. Installing the software 20
- (2) Connecting a USB cable 21
- C. Setting up button manager 24
- (1) Windows XP 24
- (2) Windows 98/Me/2000 25
- 10. Interface 26
- 11. Moving 26
- [6] COPY PROCESS 27
- 2. Outline of print process 28
- 3. Actual print process 28
- About DC 5.2kV 29
- Process controlling 30
- [7] OPERATIONAL DESCRIPTIONS 31
- 2. Scanner section 32
- 3. Laser unit 33
- 4. Fuser section 33
- (1) Heat roller 34
- (2) Separator pawl 34
- (3) Thermal control 34
- (4) Fusing resistor 34
- 7. RSPF section 37
- 9. Shifter 39
- [8] DISASSEMBLY AND ASSEMBLY 40
- 2. Operation panel section 41
- 3. Optical section 42
- CCD core 43
- 4. Fusing section 44
- Heat roller disassembly 45
- PS semi-circuler 50
- 6. Manual paper feed section 51
- Back Wire treatment 52
- 7. Rear frame section 53
- 8. Power section 54
- C. Remove the Duplex motor 55
- A. Remove the reverse unit 55
- B. Remove the reverse roller 55
- (1) Remove the rear cabinet 56
- (2) Remove the RSPF 56
- F. Sensor PWB 57
- G. Pickup solenoid 57
- H. Clutch 57
- (1) Remove the clutch unit 57
- (2) Remove the clutch 58
- (1) Remove the pickup unit 58
- (1) Remove the parts 60
- (2) Remove the parts 61
- T. Solenoid 62
- (1) Remove the reverse gate 62
- (2) Remove the solenoid 62
- [9] ADJUSTMENTS 63
- B. Image position adjustment 64
- (1) Lead edge adjustment 64
- B4 or 8 1/2″ × 14″ paper 65
- A4 size rear edge 65
- Scale image 65
- Paper rear edge 65
- (2) Mode select key 66
- 3. High voltage adjustment 67
- 4. Duplex adjustment 67
- Document guide 68
- The trailing edge has a scale 68
- Table glass 68
- Scale (D-D mode) 68
- 6cm or more is required 69
- Chart back surface 70
- 2. Key rule 71
- 3. List of test commands 71
- [→/10KEY] 75
- ←/10KEY] 75
- ←/→/10KEY] 84
- ∗ No density display on LCD 87
- ←], turn on the power 91
- Image loss, R = 4mm 92
- ←/→] key 95
- ∗ Default: 0 96
- 5. Trouble codes 97
- [11] USER PROGRAM 100
- B. Print mode 101
- [12] ELECTRICAL SECTION 102
- 2. Circuit descriptions 103
- (4) Reset circuit 108
- KID65503F 109
- TD62064AF 111
- (Semiconductor switch) 112
- +12V regulator IC 112
- (with ON/OFF function) 112
- Voltage waveform 113
- [13] CIRCUIT DIAGRAM 114
- Serial EE-PROM 115
- HG73C138HFV 116
- MCU PWB (Memory section) 118
- MCU PWB (Driver section 1) 120
- NC7ST08M5X 121
- MCU PWB (Driver section 2) 122
- MCU PWB (Driver section 3) 124
- Duplex Motor Driver 125
- MCU PWB (IMC2 section 1/2) 128
- K4S561632D 129
- MLF1608-J 130
- MCU PWB (Connector section 1) 132
- To Operational PWB 133
- To Mirror motor 133
- OA982 JTAG & Serial 134
- FF4-32-S15D5 138
- 2. OPERATION PWB 139
- To MCU PWB 141
- To Drum Initial Detector 141
- To FAX Key PWB 141
- P2010/PLL701-01 142
- UPD703100GJ-33-8EU 142
- RTL8019AS 144
- 24FMN-SSTK-A 145
- IS93C46-3GR 145
- 4. POWER SUPPLY 146
- (1) MCU SECTION (1/3) 148
- (2) D-SPF SECTION (2/3) 149
- 1. Download procedures 151
- 4. Serial number setting 154
- 5. Installing procedures 154
- LEAD-FREE SOLDER 158
- CAUTION FOR BATTERY DISPOSAL 159
- Trademark acknowledgements 160
Verwandte Produkte und Handbücher für Kopierer Sharp AL-1651CS
Kopierer Sharp MX-2700G Spezifikationen
(88 Seiten)
(88 Seiten)
Kopierer Sharp AR-FX11 Bedienungsanleitung
(8 Seiten)
(8 Seiten)
Kopierer Sharp AR-M208 Bedienungsanleitung
(24 Seiten)
(24 Seiten)
Kopierer Sharp MX-M465N Bedienungsanleitung
(28 Seiten)
(28 Seiten)
Kopierer Sharp MX-2300N Guide Einstellungsanleitung
(132 Seiten)
(132 Seiten)
Kopierer Sharp AL-2061 Spezifikationen
(178 Seiten)
(178 Seiten)
Kopierer Sharp MX-M363N Spezifikationen
(113 Seiten)
(113 Seiten)
Kopierer Sharp AR-M162 Spezifikationen
(108 Seiten)
(108 Seiten)
Kopierer Sharp AR-5120 Spezifikationen
(66 Seiten)
(66 Seiten)
Kopierer Sharp MX-C380 Einstellungsanleitung
(84 Seiten)
(84 Seiten)
Kopierer Sharp MX-M363U Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Kopierer Sharp AR-CF2 Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Kopierer Sharp MX-M282N Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Kopierer Sharp 3150 - FO B/W Laser Wartungshandbuch
(272 Seiten)
(272 Seiten)
Kopierer Sharp AR-5316E Spezifikationen
(19 Seiten)
(19 Seiten)
Kopierer Sharp AX-600X(R) Spezifikationen
(132 Seiten)
(132 Seiten)
Kopierer Sharp MX-4101N Einstellungsanleitung
(45 Seiten)
(45 Seiten)
Kopierer Sharp MX-M362N Bedienungsanleitung
(12 Seiten)
(12 Seiten)
Kopierer Sharp AR-M316 Spezifikationen
(48 Seiten)
(48 Seiten)
Kopierer Sharp AR-5316E Bedienungsanleitung
(80 Seiten)
(80 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 2.147 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern