Sharp R-230L Betriebsanleitung PDF herunterladen (Seite 27)

CAUTION

Disconnect the supply cord plug from the power outlet.

CAUTION

Keep the machine, especially its grip surfaces, clean and free from oil and grease. Do not use cleaning agents

which contain silicone.

11.1 Cleaning using high-pressure or steam-cleaning systems

Avoid directing the jet towards the bearings and seals when systems of this kind are used for cleaning the guide

pulley stands and saw head.

11.2 Maintenance of the single-pair pulley stand

As the guide pulleys used for flush cutting are

equipped with two ball bearings at the pivot, these

should be lubricated at least once a month.

Procedure: Unscrew the locking bolt completely and

inject a little oil into the threaded opening. Reinsert

the bolt (see fig. 11.2).

11.3 Rubber rim on the pulleys

The rubber rim on the drive wheel and guide / return pulleys should be checked at regular intervals. A wheel or

pulley should be replaced as soon as the aluminium beneath the rubber is visible (rubber worn through).

11.4 Diamond wire guard and drive wheel guard

These parts should be cleaned daily and checked to ensure that the rolling-up mechanism of the diamond wire

guard always functions correctly.

11.5 Maintenance of the hydraulic power unit, saw head and other saw modules

Please refer to the D-LP 32 (30) / DS-TS 32 (30) operating instructions.

11.2

Locking bolt

11. Care and maintenance

Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

Keine Kommentare

Sharp R-230L Betriebsanleitung Seite 27