Sharp AL-1451 Spezifikationen Seite 36
- Seite / 126
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
AL-1551 OPERATIONAL DESCRIPTIONS 7-9
C. Operational descriptions
D. Cases where a document jam is caused
1) When SPPD is ON (document remaining) when the power is turned
on.
2) When SPPD is not turned ON within about 1.5 sec (at 100% copy)
after starting the document feed operation.
3) When SPPD is not turned on within about 4.7 sec (at 100% copy)
after turning on SPPD.
4) When the SPF document jam release door or the OC cover is
opened during document transport (SPF motor rotating).
8. D-D (Duplex to Duplex) mode paper/
document transport (Duplex model)
A. Initial state
Set duplex documents on the document tray.
Set paper on the cassette. (In the duplex mode, the manual feed tray
cannot be selected.)
B. Front copy
Document transport:
The document feed roller feeds the document from the paper feed roller
to the PS roller.
•The document is exposed in the exposure section, and sent to the
document exit section
•by the transport/paper exit roller.
•R-SPF gate solenoid ON
•The document is sent to the intermediate tray.
(but not discharged completely.)
•The document is stopped once, then switchback operation is
performed.
(To the back copy)
Paper transport:
The document is passed through the paper feed roller and the PS roller
by the paper feed roller
and the images on the front surface are transferred.
•The paper is passed through the fusing section and the lower side of
the gate section to the paper exit tray side, (but not discharged
completely.)
•It is stopped once and switchback operation is performed.
(To the back copy)
SPID ON
PSW ON
MIRM rotation
MM rotation
CPFS ON
SPFM rotation
SPUS ON
Document set
Document set sensor
Document feed unit lamp ON
PPD ON
RRC ON
SPPD ON
POD ON
Copy start
The scanner is shifted
to the exposure position.
(Copier side)
Main motor rotation
Paper feed
Synchronization
(Transfer)
(Fusing)
(Document exit)
Paper transport
(Exposure)
In the zooming mode, the magnification ratio in the sub
scanning direction (paper transport direction) is adjusted
by changing the document transport speed.
(Paper exit)
SPF motor rotation
Document feed
Document transport sensor
Document transport
(SPF side)
Time chart (Tray feed)
752msec
625msec
756msec
PSW
MIRR M
SPF M
CL
SPUS
SPPD
SCANST
MAIN M
CPFS1
RRS
PPD1
PPD2
POD
Gate OFF
Lower Side of Gate
Gate ON
- DIGITAL COPIER 1
- CAUTION 2
- CONTENTS 4
- [1] GENERAL 5
- [2] SPECIFICATIONS 6
- 3. Copy performance 8
- 4. Printer specifications 9
- [3] CONSUMABLE PARTS 10
- Production control 11
- 1. Appearance 12
- 2. Internal 12
- 1234567 891011 12 13
- 181716151413 13
- (AL-1551) 13
- 4. Motors and solenoids 14
- 5. Sensors and switches 15
- 6. PWB unit 16
- 7. Cross sectional view 17
- 1. Copier installation 18
- 2. Cautions on handling 18
- 4. Unpacking 19
- 4 or 5 times 20
- Paper guide (B) 20
- Paper guide (A) 20
- 8. Power to copier 21
- B. Windows 98: 22
- C. Windows Me/Windows 2000: 22
- D. Windows 3.1x: 22
- 10.Parallel interface 23
- [6] COPY PROCESS 24
- 2. Outline of print process 25
- 3. Actual print process 25
- About DC 5.2kV 26
- Process controlling 27
- [7] OPERATIONAL DESCRIPTIONS 28
- 2. Scanner section 29
- No Component Function 30
- (1) Heat roller 31
- (2) Separator pawl 31
- (3) Thermal control 31
- (4) Fusing resistor 31
- 7. SPF section 35
- C. Operational descriptions 36
- A. Initial state 36
- B. Front copy 36
- Upper Side of Gate 37
- Gate OFF 37
- Transfer 38
- Lock pawl rear 38
- Lock pawl front 38
- 2. Operation panel section 39
- 3. Optical section 40
- Thermistor 41
- PPD2 sensor 42
- Hearter lamp 42
- Heat roller 43
- B. Disassembly procedure 44
- Clutch unit 48
- Paper feed 48
- Wire treatment 49
- 7. Rear frame section 52
- 8. Power section 53
- A. Sensor PWB 54
- B. Pickup solenoid 54
- C. Clutch 54
- F. SPF motor 55
- G. Paper entry sensor 55
- 10.2nd cassette section 56
- D. Transport roller 57
- E. Paper feed clutch 57
- F. 2nd paper feed roller 57
- B. Cassette detection switch 57
- C. Paper feed solenoid 57
- (1) Remove the rear cabinet 58
- (2) Remove the shield plate 58
- (3) Remove the RSPF 59
- (1) Remove the clutch unit 60
- (2) Remove the clutch 60
- J. Transport unit removal 61
- K. Belt 1 61
- (1) Remove the parts 62
- (2) Remove the parts 63
- (1) Remove the reverse gate 64
- (2) Remove the solenoid 64
- Fixing Screws 65
- Set screw 66
- Scanner unit drive pulley 66
- LL and LR: 67
- Distance between the copy 67
- (1) Outline 68
- Shizuoka 69
- (1) Lead edge adjustment 70
- Lens unit number 70
- ( ) direction 70
- Reference line (0) 70
- (+) direction 70
- 2.0mm or less 71
- 2. Copy density adjustment 72
- Non toner 73
- Toner save 73
- The front edge of the 74
- Front edge of paper 74
- [10]SIMULATION, TROUBLE CODES 75
- 2. List of simulations 76
- 4. Trouble codes 88
- [11]USER PROGRAM 89
- [12]ELECTRICAL SECTION 90
- B. MCU PWB unit 91
- (1) CPU signal table 92
- (2) ASIC (Signal table) 94
- 3. Reset circuit 99
- A. Outline 100
- 5. Driver circuit (Solenoid) 101
- 7. Main motor drive circuit 101
- 8. Mirror motor circuit 102
- 9. Duplex motor circuit 102
- A. Block diagram 103
- (1) Main section 104
- (2) FW signal 105
- (3) Heater lamp drive circuit 105
- (4) High voltage section 105
- 11.CL invertor PWB (circuit) 106
- 13.Operation section 107
- [13]CIRCUIT DIAGRAM 108
- AL-1551 CIRCUIT DIAGRAM 13-2 109
- AL-1551 CIRCUIT DIAGRAM 13-3 110
- AL-1551 CIRCUIT DIAGRAM 13-4 111
- AL-1551 CIRCUIT DIAGRAM 13-5 112
- AL-1551 CIRCUIT DIAGRAM 13-6 113
- AL-1551 CIRCUIT DIAGRAM 13-7 114
- AL-1551 CIRCUIT DIAGRAM 13-8 115
- AL-1551 CIRCUIT DIAGRAM 13-9 116
- GDI MEMORY PWB (6MB) 117
- POWER SUPPLY (120V/127V) 118
- POWER SUPPLY (200V Series) 119
- ACTUAL WIRING DIAGRAM 1/5 120
- AL-1551 CIRCUIT DIAGRAM 13-14 121
- AL-1551 CIRCUIT DIAGRAM 13-15 122
- AL-1551 CIRCUIT DIAGRAM 13-16 123
- AL-1551 CIRCUIT DIAGRAM 13-17 124
- CAUTION FOR BATTERY DISPOSAL 125
- COPYRIGHT 126
- 2001 BY SHARP CORPORATION 126
Verwandte Produkte und Handbücher für Multifunktionsgeräte Sharp AL-1451
Multifunktionsgeräte Sharp FO-150 Bedienerhandbuch
(248 Seiten)
(248 Seiten)
(91 Seiten)
Multifunktionsgeräte Sharp FO-155 Bedienerhandbuch
(248 Seiten)
(248 Seiten)
Multifunktionsgeräte Sharp AR-168N Spezifikationen
(177 Seiten)
(177 Seiten)
Tripp Lite PDUMV15NET manuali
Manuali dei proprietari e guide per l'utente per Multiprese Tripp Lite PDUMV15NET.
We fornisce 1 manuali pdf Tripp Lite PDUMV15NET per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Tripp lite PDUMV15NET Manuale Utente (2 pagine)
Marchio: Tripp-lite | Categoria: Power distribution units (PDUs) | Dimensione: 0.63 MB |
Indice
Più prodotti e manuali per Multiprese Tripp Lite
| Modelli | Tipo di Documento |
|---|---|
| PDUMH20NET2 |
Manuale Utente
Tripp Lite PDUMH20NET2 User's Manual,
4 pagine
|
| PDUMH20HVNET |
Manuale Utente
Tripp Lite PDUMH20HVNET User's Manual,
11 pagine
|
| PDUMH15ATNET |
Manuale Utente
 
Tripp Lite PDUMH15ATNET User's Manual,
36 pagine
|
| PDU Power Strips |
Manuale Utente
Tripp Lite PDU Power Strips User's Manual,
3 pagine
|
| OMNI1500XLNAFTA |
Manuale Utente
Tripp Lite OMNI1500XLNAFTA User's Manual,
5 pagine
|
| PDUNV |
Manuale Utente
Tripp Lite PDUNV User's Manual,
2 pagine
|
| 200904140 |
Manuale Utente
Tripp Lite 200904140 User's Manual [en] ,
9 pagine
|
| PDUMH15AT |
Manuale Utente
Tripp Lite PDUMH15AT User's Manual,
28 pagine
|
| PS-415-HG-OEM |
Manuale Utente
Tripp Lite PS-415-HG-OEM User's Manual,
2 pagine
|
| TRIPP.LITE PDUMV40 |
Manuale Utente
Tripp Lite TRIPP.LITE PDUMV40 User's Manual,
12 pagine
|
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.037 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern