Sharp DP-750 Bedienungsanleitung PDF herunterladen (Seite 25)

DP750 User's Manual

- 21 -

Chapter 3 Paper loading

3.1 Paper Thickness Adjustment

Before loading cut sheet or tractor paper, you have to adjust the gap adjust lever on the right of the printer.

To feed thicker paper through the printer, you need to move the gap adjust lever from its standard position.

The lever moves the print head relative to the platen so that there is more room for the paper.

Adjusting the Gap adjust Lever

To obtain good quality printing and prevent problems (paper jam etc.) adjust the gap adjust lever as shown

in Figure 3-1. The scale number # 1 shown in Figure 3-1 identifies the standard paper thickness setting.

This is the recommended setting for most papers. Use Table 3-1 to find the recommended setting for other

papers.

3.2 Using Cut Sheets

1. Turn the printer on.

2. Set paper select lever toward the back of printer as shown in Figure 3-2.

Position Paper thickness

1 0.06 mm-0.12 mm

1.5 0.12 mm-0.22 mm

2 0.22 mm-0.32 mm

2.5 0.32 mm-0.42 mm

3 0.42 mm-0.52 mm

3.5 0.52 mm-0.62 mm

4 0.62 mm-0.70 mm

4.5 0.70 mm-0.78 mm

5 0.78 mm-0.85 mm

Figure 3-2 Setting the paper select lever

Paper select lever

Gap adjust lever

Table 3-1 Paper thickness setting

Remark:

Figure 3-1 Setting the gap adjust lever

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 52 53

Keine Kommentare

Sharp DP-750 Bedienungsanleitung Seite 25