Sharp DP-750 Bedienungsanleitung PDF herunterladen (Seite 28)

DP750 User's Manual

- 24 -

5. Ensure the tractor paper is inline with the printing home position. If the paper is not aligned with

the printing home position, align the paper, and then fasten the lock lever to lock the tractors.

6. Slide the right tractor to left to take up any slack in the paper, and then fasten the lock lever to fix

the tractor in position.

7. Align the paper with the print start position.

Ensure the tractor paper is inline with the print start position. If the paper is not aligned with the

print start position, release the tractor rock levers of the left and right tractors, align the paper, and

then fasten the lock lever to lock the tractors.

3.5 Tearing off Tractor Paper

In the factory default setting, the function of loading tractor paper to tear position has been turned on.

After finish printing, the printer will load the tractor paper slot to the tear position automatically. Tractor

paper can be torn off by the printer cover edge, (as shown in Figure 3-10). If you want to change the

default setting, please turn off the function of loading tractor paper to tear position, after finish printing,

press LOAD/EJECT key to load the paper to tear position.

If the perforation of the paper is not at the edge of the top cover, adjust the tear off position (refer to

chapter 4, Control Panel).

Figure 3-10 Tractor paper tear off

Paper Top

Tractor

Figure 3-9 Setting paper on the sprocket pins

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 52 53

Keine Kommentare

Sharp DP-750 Bedienungsanleitung Seite 28