Thermostat Removal & Replacement
USE TWO WRENCHES WHEN TIGHTENING OR
UNTIGHTENING GAS FITTINGS. LEAK TEST AF-
TER WORKING ON ALL GAS FITTINGS. FAILURE
TO DO SO COULD RESULT IN A GAS LEAK
WHICH COULD RESULT IN A FIRE OR EXPLO-
SION, WHICH COULD CAUSE PERSONAL IN-
JURY OR DEATH.
1. Turn off the gas supply at the main tank.
2. Remove the inlet flare fitting to the Gas Control
Valve.
3. Remove the outlet flare fitting from the Gas Con-
trol Valve.
4. Remove the screw that secures the Control As-
sembly to the cabinet.
5. Lift the Control Assembly away from the cabinet.
6. Remove the two screws that secure the
Thermostat to the Control Assembly.
7. Remove the two red wires from the Thermostat.
8. Remove the clips that secure the capillary tube
to the fins, noting that the capillary tube is lo-
cated on the fifth fin from the right.
9. Pull the capillary tube through the back of the
cabinet.
10. To reinstall reverse the above procedure.
11. Leak test all gas fittings removed.
Selector Switch Removal & Replacement
USE TWO WRENCHES WHEN TIGHTENING OR
UNTIGHTENING GAS FITTINGS. LEAK TEST AF-
TER WORKING ON ALL GAS FITTINGS. FAILURE
TO DO SO COULD RESULT IN A GAS LEAK
WHICH COULD RESULT IN A FIRE OR EXPLO-
SION, WHICH COULD CAUSE PERSONAL IN-
JURY OR DEATH.
1. Turn off the gas supply at the main tank.
2. Remove the flare fitting from the inlet tube of the
Gas Control Valve.
3. Remove the outlet tube flare fitting from the Gas
Control Valve.
4. Remove the screws that secures the Control As-
sembly to the cabinet.
5. Lift the Control Assembly away from the cabinet.
6. Remove the selector switch knob.
7. Remove the two screws that secure the selector
switch to the Control Assembly.
8. Lift the selector switch away from the control
bracket.
9. Remove the wires from the selector switch one
at a time and connect to the new switch exactly
as removed. Double check the wiring connec-
tions with the wiring diagrams as follows:
Orange wires to G3 & W3
Red wires from Thermostat to W2 & W3
Red wires from fuse & terminal block to AC1
& AC2
Blue wires to DC1 & DC2
10. To reinstall, reverse Steps 7-1.
11. Leak test all gas fittings removed.
Orifice Removal & Replacement
USE TWO WRENCHES WHEN TIGHTENING OR
UNTIGHTENING GAS FITTINGS. LEAK TEST AF-
TER WORKING ON ALL GAS FITTINGS. FAILURE
TO DO SO COULD RESULT IN A GAS LEAK
WHICH COULD RESULT IN A FIRE OR EXPLO-
SION, WHICH COULD CAUSE PERSONAL IN-
JURY OR DEATH.
1. Turn off the gas supply at the main tank.
2. Remove the flare nut from the orifice assembly.
3. Remove the orifice assembly from the burner.
WARNING
WARNING
WARNING
20
(44 Seiten)
(25 Seiten)
(24 Seiten)
(59 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern