Sharp VC-H670X Spezifikationen PDF herunterladen (Seite 191)

100

101

2.7.2 Wire Installation

1. Position the scanner drive pulley as shown with the Allen screws facing

you.

2. Put the bead at the end of the blue wire [1] in slot [A] (opposite from the

Allen screws).

3. Put the bead of the silver wire [2] in slot [B] on the Allen screw side.

4. Wind the blue wire [1] clockwise halfway around the pulley. Wind the sil-

ver wire [2] clockwise one complete turn around the pulley.

5. Wind the blue and silver wires together five and a half times around the

pulley. Make sure that the blue wire is wound six times and the silver wire

is wound six and a half times in total.

6. Set the omega clamp [C] over the wires on the drive pulley as shown.

[1]

[A]

[B]

[2]

[C]

[1]

[2]

[3]

[4]

1 December 1990

5-15

1 2 ... 186 187 188 189 190 191 192 193 194 195 196 ... 585 586

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp VC-H670X Spezifikationen Seite 191

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Aufnahmegeräte Sharp VC-H670X