3-6 Internal Inspection
1) Remove and inspect the stirrup
adapter{Code #47867, Pos. 86} in Figure
310. Ensure it is straight and the anchor pin
is secure.
2) Remove and inspect the exit tube {Code
#63725, Pos. 41} shown in Figure 311.
Ensure it's free of debris inside. Replace as
needed.
3) Remove the two socket head cap
screws {Code #8926, Pos. 53} and two
locking washers {Code #16616, Pos. 32} in
Figure 312 & 313.
4) Inspect the upper wire rope guiding plate
{Code #63715, Pos. 46} and compare it to
Figures 314 and 315.
Figure 315 shows how the guiding plate should
look like. Figure 314 shows a bent or damaged
wire rope guiding plate which must be replaced.
10
Figure 310
Figure 311
Figure 314
NOTE
IF the plate shows damage, this indicates a
wire rope jam has occurred and the pressure
system must be carefully inspected.
Figure 312
Figure 313
Figure 315
Kommentare zu diesen Handbüchern