Sharp 32L-X2000 Bedienerhandbuch PDF herunterladen (Seite 22)

3) Using a 10 mm hex, remove the oil plug

{Code #37646, Pos. 68} and drain the

synthetic gear oil into a clean bucket.

Inspect the oil for brass flakes or metal filings

(Figure 412).

4) Inspect the plug and copper gasket {Code

#37656, Pos. 70} for wear or damage as

shown in Figure 413. Replace if necessary.

5) Remove the (4) M6x20 socket head screws

{Code #4176, Pos. 69} as shown in Figure

414.

6) Rotate the gearbox cover {Code #40505,

Pos. 3} slightly with a brass hammer

(or soft hammer) and tap upwards as shown

in Figure 415.

7) Carefully pry off the gearbox cover {Code

#40505, Pos. 3} as shown in Figure 416.

Avoid damaging the casing base.

8) Inspect the cover {Code #40505, Pos. 3} for

damage (Figure 417). Replace the ‘O’-ring

{Code #39286, Pos. 12}.

Figure 412

Figure 415

Figure 416

Figure 417

Figure 413

Figure 414

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 76 77

Keine Kommentare

Sharp 32L-X2000 Bedienerhandbuch Seite 22