Sharp SYSTEM 8/10 Plus Bedienerhandbuch PDF herunterladen (Seite 332)

C-Link Protocol Commands

Diagnostics

B-24 Model 5030i SHARP Instruction Manual Thermo Fisher Scientific

baro pres

This command reports the current barometric pressure, in mmHg. The

following example reports that the barometric pressure is 722 mmHg.

Send: baro pres

Receive: baro pres 722.0 mmHg

board temp

This command reports the current board temperature, in degrees C. The

following example reports that the board temperature is 15 °C.

Send: board temp

Receive: board temp 15.0 degC

crn

This command reports the current radon concentration for the detector.

The following example reports that the radon concentration is 1.2 Bq/m

Send: crn

Receive: crn 1.20 Bq/m3

det status

This command reports the current mass for the detector. The sequence is:

α, β, β

, β

REF

. Each value is separated by a space.

Send: det status

Receive: det status 1 9657 9600 4623

diag volt det

This command reports the diagnostic voltage measurements on the

detector board. The voltage is positive 5.

Send: diag volt det

Receive: diag volt det 4.9

diag volt iob

This command reports the diagnostic voltage measurements on the I/O

expansion board. The sequence of voltages is: Positive 24, positive 5,

positive 3.3, and negative 3.3. Each voltage value is separated by a space.

Send: diag volt iob

Receive: diag volt iob 24.10 4.90 3.20 -3.20

diag volt mb

This command reports the diagnostic voltage measurements on the

motherboard. The sequence of voltages is: Positive 24, positive 15, positive

5, positive 3.3, and negative 3.3. Each voltage value is separated by a space.

1 2 ... 327 328 329 330 331 332 333 334 335 336 337 ... 402 403

Keine Kommentare

Sharp SYSTEM 8/10 Plus Bedienerhandbuch Seite 332