Sharp R-440/540 Betreibershandbuch PDF herunterladen (Seite 25)

918496/GP0313 17

• Never use your hands to search for hydraulic fluid leaks. Instead, use a

piece of paper or cardboard. Escaping fluid under pressure can be

invisible and can penetrate the skin and cause serious injury. If any fluid is

injected into your skin, see a doctor at once. Injected fluid must be

surgically removed by a doctor or gangrene may result.

• Always wear safety glasses with side shields when striking metal against

metal. In addition, it is recommended that a softer (chip-resistant) material

be used to cushion the blow, otherwise, serious injury to the eyes or other

parts of the body could result.

• Stay clear from underneath the operator’s platform as it is tilted.

• Always secure the operator’s platform in the tilted position with the tilt

support. Never allow anyone under the operator platform if the tilt support

is not in place.

• Always secure the operator’s platform to the chassis with anchor bolts,

nuts and washers before driving and using the machine.

• Check operator’s platform tilt components and tilt support components at

regular intervals. Replace damaged or worn parts immediately.

• Do not smoke or have any spark- or flame-producing equipment or

materials in the area while filling the fuel tank or working on the fuel or

hydraulic systems.

• Keep fuel and other fluid reservoir caps tight. Do not start the engine until

caps have been secured.

• Always lower lift arm or elevated items, or securely support/secure them,

before performing any maintenance or service on the machine.

• Do not attempt to loosen or disconnect any hydraulic lines, hoses, fittings,

covers or caps without first relieving hydraulic circuit pressure. Relieve

hydraulic pressure by performing the Mandatory Safety Shutdown

Procedure (page 10) and slowly loosening the hydraulic reservoir filler

cap. Be careful not to touch any hydraulic components that have been in

recent operation, because they can be hot and cause burns.

• Do not attempt to remove the radiator cap after the engine has reached

operating temperature or if it is overheated. At operating temperatures,

engine coolant is extremely hot and under pressure. Always wait for the

engine to cool before attempting to relieve pressure and remove the

radiator cap. Failure to heed this warning could result in severe burns.

• Use solid support blocking. Never rely on jacks or other inadequate

supports when maintenance work is being done. Never work under any

equipment supported only by jacks.

• Refer to the parts manual for information about assembly of components.

Always use the correct parts and the proper torques — incorrect fastener

connections can dangerously weaken assemblies.

• Exhaust fumes can kill. Do not operate the machine in an enclosed area

unless there is adequate ventilation.

• Operators should also be aware of any open windows, doors or ductwork

into which exhaust gases may be carried, exposing others to danger.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp R-440/540 Betreibershandbuch Seite 25

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Sharp R-440/540