Sharp R-440/540 Betreibershandbuch PDF herunterladen (Seite 82)

74 918496/GP0313

Lift Arm Down-Stop

The lift arm down stop is designed to limit lift arm downward travel. This feature

is useful when changing tire sizes, or when driving the machine over long

distances.

1. Empty the bucket (if applicable).

2. Position the lift arm above the down stop hole (A, Fig. 29) position where you

want to limit travel, and also high enough to allow removal of the down-stop

lock bar (B).

3. Perform the “Mandatory Safety Shut-

down Procedure” on page 10.

4. Remove the lock pin (A), and pull the

lock bar (B) from the machine.

5. Slide the lock bar (B) all the way

through the desired down-stop holes

(C).

6. Replace the lock pin (A) into the lock

bar.

Travel

Do not move the drive direction switch (Fig. 34)

while traveling. The machine may react

suddenly, causing an accident.

Change drive direction only when stopped. Refer to the drive

direction lamps when changing travel direction. See “Controls and

Switches” on page 52, and “Instrument Panel and Indicators” on

page 54.

Important: If the optional backup alarm is

installed, and the parking brake is released,

the backup alarm activates when the drive

direction switch is in reverse.

1. Be sure that the area around the loader

is clear of bystanders and obstacles.

2. Using the multi-purpose joystick, raise

the lift arm/attachment. Keep the attach-

ment as near to the ground as possible

for good stability and visibility. See

“Load Handling” on page 77.

3. Release the parking brake. Lift lever (G,

Fig. 33) slightly and press button (F)

and press lever (G) downward. Release

the button.

Figure 32 – Lift Arm Down-Stop

WARNING

Figure 33 – Parking Brake

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp R-440/540 Betreibershandbuch Seite 82

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Mikrowellen Sharp R-440/540