Sharp R-440/540 Betreibershandbuch PDF herunterladen (Seite 37)

918496/GP0313 29

ISO-Style Safety Decal Locations (Cont.)

Note: Refer to Fig. 5 on page 27 for decal locations.

STOP

274564

General Safety Shutdown Warning

• Located on the control column, facing the

operator.

• Read the Operator’s Manual and all safety

signs before using the machine.

• Shutdown Procedure:

1) Lower equipment to the ground.

2) Reduce the throttle and apply the parking

brake.

3) Shift to Neutral.

4) Stop the engine and remove the key.

273901

BCD

General Operating Warnings

• Located on the left side of the control

column.

A) Crush hazard / Keep out from under lift

arm unless lift arm is supported.

B) Side tip hazard / Avoid steep slopes

and high-speed turns. Travel up and

down slopes with heavy end uphill.

Fasten seat belt.

C) Forward tip hazard / Carry load low. Do

not exceed rated operating capacity.

D) Fall hazard / No riders! Never use

attachment as work platform.

184711

WARNING: Crush Hazard

• Located under the operator’s platform on top of

the left rear wheel well.

• Be sure cab tilt support is securely engaged

before working under operator’s platform. See

“Tilting the Platform” on page 107.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 179 180

Keine Kommentare

Sharp R-440/540 Betreibershandbuch Seite 37