
918496/GP0313 81
Attachments
General Instructions
Use only approved attachments. Contact the
Manitou Americas Service Department about
information about approved attachments. Manitou Americas cannot
be responsible if the machine is used with non-approved
attachments. Read the operator’s manual provided with all
attachments used with the machine before starting the engine. A
loaded attachment changes the center-of-gravity of the machine.
Use caution! Never exceed the rated operating capacity – refer to
weights and capacities information starting on page 33. Before
using an attachment, check that the attachment is undamaged and
properly connected and locked.
Practice using an attachment before working
with it.
Connect/Disconnect Attachments
Check that hitch pins and auxiliary hydraulic
connections are properly connected and
locked.
All-Tach
®
System Hitch Connection
1. Position the attachment so the attach-
ment flange fits over the top lip of the
hitch (Fig. 43).
2. Pull the joystick rearward until the
attachment is flush against the hitch
surface.
3. Perform “Mandatory Safety Shutdown
Procedure” on page 10.
Figure 43 – Standard All-Tach
®
System Hitch Positioning
Kommentare zu diesen Handbüchern