Sharp R-440/540 Betreibershandbuch PDF herunterladen (Seite 75)

918496/GP0313 67

Engine Start

Important: The machine cannot be tow-started because there is no direct

mechanical connection between the wheels and the engine. Attempting to tow-

start the machine can damage the drive system.

Always fasten the seat belt before operating

the machine. Repair or replace any damaged

seat belt and lock parts before operation.

Do not use starting fluid (ether) with preheat

systems. An explosion can result, which can

cause engine damage, injury or death.

1. If the machine is equipped with the

optional battery disconnect switch

(Y, Fig. 23), check that switch (Y) is.

turned clockwise to the notched

position “ON” position (Z).

Note: To disconnect battery and lock

out all electrical functions, turn

switch (Y) counter-clockwise to the

“OFF” (A) position.

2. Adjust the operator’s seat (see

“Operator’s Seat Adjustment” on

page 59) and fasten the seat belt.

3. Adjust the steering column (see

“Steering Column Adjustment” on

page 60).

4. Engage the parking brake (W, Fi g .

24), lift the lever (X) into the upright

position as shown.

Note: When the parking brake is

engaged, travel drive is disconnected.

On AL 300 Series machines, the parking

brake must be engaged before starting a

cold engine, and the brake must be left engaged for three minutes

after starting, or damage to the hydraulic pump may result.

WARNING

CAUTION

Figure 23 – Optional Battery Dis-

connect Switch

Located Inside Engine Compartment

Figure 24 – Parking Brake

VERY IMPORTANT!

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 179 180

Keine Kommentare

Sharp R-440/540 Betreibershandbuch Seite 75