Sharp R-440/540 Betreibershandbuch PDF herunterladen (Seite 76)

68 918496/GP0313

5. Place forward/reverse drive switch

(Fig. 25) on the top of the joystick

into the neutral position.

6. Turn the ignition key to the “I” (Run)

position (Fig. 26).

7. When the pre-heat indicator light (B,

Fig. 26) goes off, turn the ignition

key to the “II” (Start) position.

Release the key when the engine

starts.

8. If the engine does not start after 15

seconds, turn the key back to the “0”

(off) position, wait one minute and

repeat steps 6-7. If the engine does

not start after several attempts, see

“Troubleshooting” on page 153.

Note: Return switch to the “0” position

between starting attempts.

9. Immediately after starting the

engine, all warning indicator lamps

should go off (see “Warning Indicators” on page 58).

10. Proceed to “Warm-up” on page 69.

Figure 25 – Drive Direction

Forward

Reverse

ForwardNeutral

Figure 26 – Ignition/Pre-Heat

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 179 180

Keine Kommentare

Sharp R-440/540 Betreibershandbuch Seite 76