Sharp FO-2080 Spezifikationen Seite 128
- Seite / 180
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
(15) Remove the screw, and remove the scanner shaft (S004/Ua001/
P007).
∗ Grease
Apply grease to the scanner rail (S004/Ua001/P006).
∗ Troubles caused by improper work
1) Copy image defect
(Image deflection)
(16) Remove the scanner drive wire (S004/Ua001/P008).
∗ Assembly procedure
1) Hang the scanner drive wire fixing metal on the scanner unit
hook.
2) Pass the wire through the outside grove of the double pulley of
the scanner unit B.
3) Hold the winding pulley groove upside, wind the wire 11 turns.
Insert the 9th turn of wire into the winding pulley groove and fix
it with the screw.
4) Wind the wire over the pulley through under the scanner unit
B.
5) Pass the wire through the inside groove of the double pulley of
the scanner unit B.
6) Hang the spring hook on the scanner unit.
∗ Note for assembly
The wire on the front frame side is different from that on the rear
frame side. Be careful not to mistake the wire colors.
∗ Troubles caused by improper work
1) L1-00 trouble
2) L3-00 trouble
3) Copy image defect
(Distortion)
(Image deflection)
S004/Ua001/Ub001 Scanner unit A
S004/Ua001/Ub001/P001 Scanner lamp
S004/Ua001/Ub001/P002 No. 1 mirror
S004/Ua001/Ub001/P003 Scanner lamp light quantity
sensor
(1) Remove the rear cabinet S001/P001 .
(2) Remove the front upper cabinet S001/P002 .
(3) Remove the right cabinet S001/P003 .
(4) Remove the left cabinet S001/P004 .
(5) Remove the document table glass S001/P007 .
(6) Remove the fan motor unit. S010/P001 .
(7) Remove the lamp cover, lift the scanner lamp diagonally, and
remove the scanner lamp (S004/Ua001/Ub001/P001).
∗ Cleaning
Use absolute alcohol to clean the scanner lamp.
∗ Troubles caused by improper work
1) Copy image defect
(Streaks in the sub scanning direction)
(Uneven density)
S004/Ua001/
P006/GRE
S004/Ua001/
P007/GRE
S004/Ua001/
P006/GRE
P008
S004/Ub001/P001/CLN
FO-3800M
9 – 17
- FO-3800M 1
- LASER PRODUCT 2
- LASER KLASSE 1 2
- Contents 3
- [1] SYSTEM CONFIGURATION 4
- A. Main Unit 4
- B. Supplies 4
- C. Accessories 4
- 2. STRUCTURE 5
- 3. SOFTWARE 5
- 4. OPERATING ENVIRONMENT 5
- [2] SPECIFICATIONS 6
- C. Printer mode 7
- (2) Job speed 8
- (3) Image quality 8
- D. Scanner mode 10
- 4. ENGINE SPECIFICATION 18
- O. Ambient conditions 20
- [3] CONSUMABLE PARTS 21
- (1) Photoconductor drum 21
- (2) Developer cartridge 22
- 4. Paper specifications 23
- 5. Standard density sample 24
- 6. Environmental conditions 25
- [4] SET UP 26
- B. Releasing lock 27
- (1) Developer cartridge 27
- Paper tray 28
- Paper release lever 28
- View from the 28
- 4. Cable connection 29
- (Scanner) driver software 29
- 6. Setup FAX section 31
- 7. Note for transport 32
- A. External, operation parts 33
- (2) Internal operation parts 34
- 12) 13) 14) 15) 35
- B. Internal parts 37
- C. Functional parts 50
- 2) POWER SW 51
- 3) IMGSM 52
- (6) Fuse, thermostat 53
- (7) Lamp 54
- (8) Interface (connector) 54
- (9) Belt, wire 55
- (10) Power 55
- D. Lock position 56
- [6] MACHINE OPERATION 57
- (14) Others 62
- [7] ADJUSTMENTS, SETTING 63
- 64
- Not copied 65
- Work content 67
- Necessary condition 67
- D 1.0mm 68
- Copy A Copy B 70
- L=10.5+CCD No(OID) 71
- HARDDENCD 72
- STAINLESS 72
- Original Copy 73
- Allow a clearance 75
- White paper 75
- (A4, 11" x 8.5") 75
- Necessary tools 76
- Draw a line 77
- A4 (11" x 8.5") 77
- Fusing temperature adjustment 80
- Power voltage adjustment 81
- JP2 (VIN) JP3 (SH) 82
- JP1 (GND) 82
- USER PROGRAM 83
- A. Outline and purpose 83
- B. Code system simulation 83
- (2) Simulation list 85
- (3) Details of simulations 87
- ∗ Main charger voltage 90
- ∗ Transfer charger voltage 90
- ∗ Developer bias voltage 90
- B. Operating procedure 96
- C. Content 96
- 3. Printing Out Reports 97
- B. List of functions 98
- (1) Soft SW change method 99
- (2) Soft switch clear mode 99
- (3) ROM & RAM check mode 100
- (4) Signal send mode 100
- (5) Image memory clear mode 101
- (7) Dial test mode (Tone) 102
- (9) Panel check mode 102
- (10) Signal detect mode 102
- A. Software Switch List 103
- FO-3800M 112
- S001 External view section 114
- S001/P001 Rear cabinet 116
- S001/P003 Right cabinet 117
- S001/P004 Left cabinet 117
- S001/P008 Bottom base plate 118
- S002 Operation section 119
- ∗ Note for assembly 120
- S003/P001 122
- S003/P003 122
- S003/P002 122
- ∗ Cleaning 123
- ∗ Grease 123
- Scanner (Reading) section 124
- S004/Ua001 Scanner unit 126
- S004/Ub001/P001/CLN 128
- Scanner (writing) section 131
- S006 Image process section 133
- S006/P006/CLN 135
- S006/P007/CLN 135
- S006/P008/CLN 135
- S007 Fusing, paper exit 136
- S007/Ua001 Fusing unit 137
- S007/Ua001/P001/CLN 138
- S007/Ua001/P003/CLN 138
- S007/Ua001/P004/CLN 138
- S007/Ua001/P005 139
- Drive section 140
- S009 Electrical section 141
- S008/P001/GRE 141
- S008/P001/ 141
- ∗ After-work 143
- S009/Ua006 LIU PWB unit 144
- ∗ Greasing 147
- S011 Other section 149
- [10] TROUBLESHOOTING 150
- A. Outline 150
- B. Function and propose 150
- D. Self diag operation 150
- F. Details 152
- Streaks and dots in the 178
- SHARP CORPORATION 180
Verwandte Produkte und Handbücher für Drucken & Scannen Sharp FO-2080
Drucken & Scannen Sharp ARNC5J Wartungshandbuch
(12 Seiten)
(12 Seiten)
Drucken & Scannen Sharp FO-DC550 Wartungshandbuch
(216 Seiten)
(216 Seiten)
Drucken & Scannen Sharp AR-FX5 Spezifikationen
(104 Seiten)
(104 Seiten)
Drucken & Scannen Sharp AR-NB3 Wartungshandbuch
(44 Seiten)
(44 Seiten)
Drucken & Scannen Sharp AR-M280N Spezifikationen
(32 Seiten)
(32 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.044 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern