Sharp FO-2080 Spezifikationen PDF herunterladen (Seite 95)

51 -6

Purpose Adjustment

Function

(Purpose)

Used to adjust the CCD sensitivity when scanning

images in the SPF mode.

Section ADF/RADF/UDH/SPF

Item Picture quality Density

Operation/

Procedure

1)The currently set adjustment value is displayed.

2) Enter the adjustment value with the 10-key and press the PRINT

switch. The entered adjustment value is stored and copying is

performed in the density corresponding to the entered adjustment

value.

When the adjustment value is increased, the copy density is

increased, and vice versa.

61 -3

Purpose Operation test/check

Function

(Purpose)

Used to check the operation of the scanner (writing)

section.

Section Laser (Exposure)

Item Operation

Operation/

Procedure

While laser beams are outputted, the scanner(writing)

motor rotates for 30 sec.

At that time, the zoom mode display lamp lights up for 100msec every

time when the laser beam sensor detects laser beam.

63 -1

Purpose Operation data output/Check (Display/Print)

Function

(Purpose)

Used to check the result of shading correction. (The

shading correction data is displayed.)

Section Optical (Image scanning)

Item Operation

Operation/

Procedure

When the start button is pressed, the scanner unit is

shifted to the shading sheet (white) position and the

scanner lamp is lighted for 10 sec.

During the above operation, one pixel at the center of CCD detects

the white level for every second and the value is displayed on the

copy quantity display in real time.

The display value ranges from 0 to 255.

63 -2

Purpose Operation data output/Check (Display/Print)

Function

(Purpose)

Used to check the result of shading correction (dark

component). (The shading correction (dark

component) data is displayed.)

Section Optical (Image scanning)

Item Operation

64 -1

Purpose Operation test/check

Function

(Purpose)

Used to check the operation (self print operation) of

the printer section.

Section Printer

Item Operation

Operation/

Procedure

1) After completion of simulation, warming up is

started.

2) After completion of warming up, the ready lamp is lighted.

3) Set the copy quantity.

4) Press the start key.

Print operation is made in the 1 by 2 mode (1-line print and 2-lines

blank pattern) to make the set quantity of copy.

64 -2

Purpose Operation data output/Check (Display/Print)

Function

(Purpose)

Used to set the scanner (reading) section’s operation

ENABLE/DISABLE. In case of a breakdown of the

scanner (reading) section, if this simulation is set to

DISABLE, the machine can be used only as a printer.

Section Optical (Image scanning)

Item Operation

FO-3800M

8 – 13

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp FO-2080 Spezifikationen Seite 95

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Sharp FO-2080