Sharp FO-2080 Spezifikationen PDF herunterladen (Seite 151)

(2) Status detection and display

Recognition of the machine status is made by each unit controller or

the machine’s controller according to the detection information of sen-

sors and detectors.

The machine status is also recognized by the control data (counter

data, etc.) of the controller itself.

The status data from the machine, the option and each unit are sent

to the host computer and displayed on the host computer’s display.

(The status data output request command is sent between each con-

trol unit and the host computer. According to the command, the status

data are sent to the unit which requests and the host computer.)

Machine

Display signal

Control unit

(Detection content analysis/Status display data output)

Command/Status

(Data signal)

Each unit

Control unit

(Detection content analysis/

Status display, data output)

Detection

signal

Sensors/Detectors

Detection

signal

Sensors/Detectors

Command/Status

(Data signal)

Display signal

Host computer

Display

(Status display)

(Status data output request command

is outputted to the machine.

The status data is displayed on the

machine display. Status display data

output)

Display/Lamp

(Status display)

E. List

Display (Code)

MAIN

CODE

SUB

CODE

Content (Title) Section

Operation

mode

Reset method NOTE

C1 L1 00 Scanner (reading) feed trouble Scanner (reading) Copy SIM 14

C2 L-3 00 Scanner (reading) return trouble Scanner (reading) Copy SIM 14 L-3 alternatively

lighted.

C3 E7 03 Laser beam output trouble Scanner (writing) Copy, print POWER OFF –

C4 E7 04 Shading correction (white level) trouble Scanner (reading) Copy POWER OFF –

C5 E7 05 Shading correction (dark component) trouble Scanner (reading) Copy POWER OFF –

C6 E7 12 Shading correction (output level) trouble Scanner (reading) Copy POWER OFF –

C7 E7 14 ASIC (MCU PWB) malfunction MCU PWB All modes POWER OFF –

C8 E7 15 Copy lamp trouble Scanner (reading) Copy POWER OFF –

C9 H2 00 Fusing temperature sensor (thermistor) trouble Fusing Copy, print SIM 14

C10 H3 00 Fusing high temperature trouble Fusing Copy, print SIM 14

C11 H4 00 Fusing low temperature trouble Fusing Copy, print SIM 14

C12 U2 01 EEPROM (MCU PWB) trouble (Counter data

error)

MCU PWB All modes SIM 16

C13 U2 04 EEPROM (MCU PWB) trouble (Read/write error) MCU PWB All modes SIM 16

C14 U2 05 EEPROM (MCU PWB) trouble MCU PWB All modes SIM 16

C15 U2 06 RAM (MCU PWB) trouble (Read/write error) MCU PWB All modes SIM 16

C16 C1 Cabinet open/close detection switch trouble Power PWB All modes Reset when the

trouble is canceled.

"CH" ON

C17 CH Developer cartridge detection trouble Developer

cartridge

All modes Reset when the

trouble is canceled.

"CH" blink

C18 E1 Paper misfeed Paper feed Copy, print Reset when the

trouble is canceled.

"P" blink

C19 E2 Paper jam (Paper entry section) Transfer, paper

feed

Copy, print Reset when the

trouble is canceled.

"JAM" blink

C20 E3 Paper jam (Fusing, paper exit section) Fusing Copy, print Reset when the

trouble is canceled.

"JAM" blink

C21 P Paper empty Paper feed Copy, print Reset when the

trouble is canceled.

"P" blink

C22 –1 SPF paper mis-feed/jam SPF SPF mode

(Copy/FAX)

Open/close the

SPF unit.

SPF paper mis-feed

lamp blinks

C23 –1 Paper jam in the main section when SPF copy

mode is selected

SPF SPF copy

mode

Restore the paper

jam and turn on

the start button or

the clear key.

Command to recopy

the one document fed

by the SPF at the

time ot the main

section paper jam.

FO-3800M

10 – 2

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 179 180

Kommentare zu diesen Handbüchern

Keine Kommentare

Sharp FO-2080 Spezifikationen Seite 151

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Drucken & Scannen Sharp FO-2080