Sharp DP-750 Wartungshandbuch PDF herunterladen (Seite 41)

Fieldbus ECO-Coupler 750-343 • 41

Description

WAGO-I/O-SYSTEM 750

PROFIBUS

3.1.1 Description

The Fieldbus Coupler 750-343 maps the peripheral data of all I/O modules in

the WAGO-I/O-SYSTEM 750 on PROFIBUS DP.

In the initialization phase, the Fieldbus Coupler determines the physical

structure of the node and creates a process image with all inputs and outputs.

I/O modules with a bit width smaller than 8 can be combined to form one byte

in order to optimize the address space.

In addition the possibility exists to deactivate projected I/O modules. In this

manner the physical structure of the node can be individually designed with

regard to the peripheral signals, without undertaking any changes to an already

existing control application. This is done by correspondingly configuring the

modules with the aid of the software configuration tool (for instance, WAGO

NETCON, COM PROFIBUS, STEP7, ProfiMap, etc.)

The diagnostics feature is based on an identification and channel based

diagnostics in accordance with EN 50170 (PROFIBUS). Thus it is not

necessary to program modules for the evaluation of manufacturer specific

diagnostics information.

· Process data length

Max. 32 byte input process image

Max. 32 byte output process image

· Automatic recognition of transmission speed on the PROFIBUS from

9.6 kBd to 12 MBd

· All I/O modules from the WAGO-I/O-SYSTEM 750 are supported

· Process image can accept virtual placeholders for future expansion

· Configurable substitute value for each channel

· D-Sub 9 pole bus connection

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 109 110

Keine Kommentare

Sharp DP-750 Wartungshandbuch Seite 41